Anti-slip Stainless Steel

Non-slip stainless steel sheets are available with CROSS (R12) and 5WL KS (R13) finishes.

The CROSS finish can be in thicknesses from 0.8mm to 6mm in most standard sheet sizes.

The 5WL KS finish, with greater sliding capacity, available in thicknesses of 0.8 mm, 1.0 mm, 1.25 mm and 1.5 mm.

Stainless steel features

Rigidity – During the texturing of steel, the material gains stiffness.

Decrease Weight – Textured steels are stiffer than standard steel plates. This allows the reduction in thickness that results from less consumption of raw materials – thus saving money.

Improved Costs – Increased steel stiffness, bump resistance and scratches are greater, which directly reduces maintenance costs.


Cross

Cross
Planchas en acero inoxidable AISI 304
Normativa antideslizante clase R12
Medidas 1250 x 2500
Grosores 0.8 mm / 1 mm / 1.5 mm

Raute – S

Raute – S
Planchas en acero inoxidable AISI 304
Normativa antideslizante clase R11
Medidas 1250 x 2500
Grosores 0.8 mm / 1 mm / 1.5 mm

5WL – KS

5WL – KS
Planchas en acero inoxidable AISI 304
Normativa antideslizante clase R13
Medidas 1250 x 2500
Grosores 0.8 mm / 1.5 mm

Mandorla

Mandorla
Planchas en acero inoxidable AISI 304 (opción 316L)
Normativa antideslizante clase R11
Medidas 1250 x 2500 (otras posibilidades)
Grosores 3 mm / 4 mm / 5 mm / 6 mm

Karo – S

Karo – S
Planchas en acero inoxidable AISI 304
Normativa antideslizante clase R11
Medidas 1250 x 2500
Grosores 0.8 mm / 1 mm / 1.5 mm