We have a wide variety of decorative, non-slip, special machinery stainless steels.The products are available in AISI 304 stainless steel and can also be ordered in AISI 316 stainless steel (depending on models)
Leinen
Measures 1250 x 2500
Thicknesses 0.8 mm / 1 mm / 1.5 mm
Leder (Pigskin)
Measures 1250 x 2500
Thicknesses 0.8 mm / 1 mm / 1.5 mm
Karo (Square)
Measures 1250 x 2500
Thicknesses 0.8 mm / 1 mm / 1.5 mm
Eisblume (Elephant Skin)
Measures 1250 x 2500
Thicknesses 0.8 mm / 1 mm / 1.5 mm
Austenit
Measures 1250 x 2500
Thicknesses 0.8 mm / 1 mm / 1.5 mm
Raute (Rhombus)
Measures 1250 x 2500
Thicknesses 0.8 mm / 1 mm / 1.5 mm
5WL
Measures 1250 x 2500/1250 x 3000
Thicknesses 0.8 mm / 1.5 mm
6WL
Measures 1250 x 2500
1.5 mm thickness
Mandorla
Measures 1250 x 2500
Thicknesses 3 mm / 4 mm / 5 mm / 6 mm
Rigidity:
During the steel texture process, when the tension is distributed evenly throughout the surface, the material gains in rigidity. Rays of light Different steel textures eliminate the “wavy” effects of light rays, as well as dissipate light in architectural applications.
Low friction surfaces:
According to the steel textures chosen, the contact area that is smaller than on a smooth surface, so that friction problems in machinery are reduced.
Weight savings:
Textured steels are much stronger than standard steel plates. This allows the reduction of the thickness that translates into the consumption of less raw material – with the consequent saving of money.
Cost improvement:
By increasing the rigidity of steel, the resistance to dents and scratches is greater, which directly implies a reduction in maintenance costs.